Importance Of Drying Ovens Temperature Control

IMPORTANCE OF DRYING OVENS TEMPERATURE CONTROL Drying ovens are used a lot in manufacturing fields, drying ovens usually have 2 main components, namely the heating part (Heater) and the place to store dried products (Drying room), depending on the form, product, field. The area where the heating element can be located directly or outside the

New Products UWT

NEW PRODUCTS UWT   UWT  is one of the world’s leading manufacturers with state-of-the-art measuring technology. With familiar solids level measurement lines such as: Point level measurement: Rotary paddle  RN3000, RN4000, RN6000 Vibration (VN1000, VN2000 VN4000, VN5000, VN6000, MN4000) Capacitive (CN4000, RF3000) Continuous level measurement: Electromechanical lot system with NB3000, NB4000. Radar sensor NR3000. Over the

Control Silo Monitoring By Bluetooth

CONTROL SILO MONITORING BY BLUETOOTH TECHNOLOGY In industry, silo level monitoring is no stranger to manufacturing plants such as cement, bricks, animal feed, etc. For silos, hoppers, tanks, tanks … installed far from the control center, the signal wire to the processor at the center to monitor many problems such as cost, signal interference, difficult

Pressure Sensor, Structure and operation principle

What is a pressure sensor? Define: A pressure sensor is an electronic device that converts a pressure signal to an electrical signal, typically used for pressure measurement or pressure related applications. Working principle: The principle of operation of the pressure sensor is similar to that of other sensors as it requires a source of pressure

BD Sensors – Sensors for food

BD SENSORS – SENSOR FOR FOOD Hygiene requirements in the food and beverage industry are applied according to international standards. Naturally, food preparation and processing must take place under guaranteed hygienic conditions. These production machines, equipment and production systems feature our BD Sensors pressure gauges, which have been developed in accordance with EHEDG (European Engineering

IP Rated Enclosures Explained

IP RATED ENCLOSURES EXPLAINED What is an IP rating? IP (or “Ingress Protection”) ratings are defined in international standard EN 60529 (British BS EN 60529:1992, European IEC 60509:1989). They are used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. What do the numbers in